
Sort your drainage before winter: French drains, soakaways and the kit to do it
October 14, 2026
Pump Hire in the South Hams for Flooded Gardens and Cellars
November 15, 2026A central heating power flush clears the sludge that leaves radiators cold at the bottom and boilers rumbling, and November is the right month to do it. The heating has been on long enough to show which radiators are struggling, but the hardest frosts are still ahead. Olympus Plant & Tool Hire delivers its Central Heating Power Flush machine across Ivybridge, Totnes, Kingsbridge and the wider South Hams.
What are the signs you need a central heating power flush?
The classic sign is a radiator that is warm at the top and cold at the bottom, even after bleeding. That cold patch is usually sludge: magnetite, a black iron oxide that forms as steel radiators and pipes slowly corrode from the inside. Other signs to look for:
- Black or dark brown water when you bleed a radiator
- A boiler that kettles, bangs or rumbles as it heats up
- Rooms that take longer to warm each winter
- Pumps or valves that keep sticking or failing
One sign on its own is not proof. If the bleed water runs clear and every radiator heats evenly, a top-up of inhibitor may be all the system needs.
What is a power flush?
A power flush is a deep clean of the water side of a central heating system. A pump unit drives water and a cleaning chemical through each radiator in turn at high flow, reversing direction to loosen deposits, then dumps the dirty water and the system is refilled with inhibitor.
The Central Heating Power Flush we hire has twin 12,000 gauss magnets that pull iron debris out of the water as it circulates, a 50 litre tank, and reverse flow and double dump as standard. British Standard BS 7593:2019 lists power flushing as one of the recognised ways to clean an existing system before chemical treatment or a filter is added, and before a new boiler goes in.
Why power flush in November rather than mid-winter?
By early November the cold spots and noisy boilers have shown themselves, and the house can still manage with the heating off for a day.
Leave it until a January cold snap and a sludged system is working hardest just when it is most likely to fail, and local engineers are at their busiest. If a new boiler is planned, flushing first protects its heat exchanger; check the manufacturer’s warranty terms, as many ask for a cleaned system.
Do you need a Gas Safe engineer to power flush a system?
Power flushing works on the water circuit only, so it is not gas work, and a competent plumber or careful DIYer can do it. Any work on the boiler itself, including its gas supply, burner or flue, must by law be carried out by a Gas Safe registered engineer.
In practice, isolate the boiler as its manual describes and leave its internals alone. If you find a leak at the boiler or pressure that will not hold, call a Gas Safe registered engineer (you can check registration on the Gas Safe Register website). If you ever smell gas, call the National Gas Emergency Service on 0800 111 999.
What do you need alongside the power flush machine?
You will need a flushing chemical, inhibitor for the refill, a hose to a suitable drain and connections to suit the system. Accessories are not included in the hire, so ask when you book and we will talk you through it.
Wear safety boots and eye and face protection while the machine runs. An electric Pipe Freeze kit is a useful extra for changing a sticking valve without draining down.
How do you book a power flush in the South Hams?
The Central Heating Power Flush hires from £70 excluding VAT a day, with weekend and weekly rates, and trade prices on request for plumbers and heating engineers.
Our Ivybridge yard is a storage, delivery and admin base only, not open to the public or trade. Call 01752 922535 or email hire@olympushiresouthhams.co.uk for a quote and we will deliver anywhere in the South Hams (Monday to Friday 7.30am to 5pm, Saturday 8am to 10am). To visit a hire counter, use our Newton Abbot store (olympustoolhire.co.uk).
Power flush questions we are often asked
How long does a power flush take?
Most homes take the best part of a day, depending on the number of radiators and how much sludge has built up.
Can a power flush damage old radiators or pipes?
It can reveal weak points, such as corroded radiators or weeping valves, that sludge was sealing. Check older systems first and have spare valves ready.
How often should central heating be power flushed?
There is no fixed interval: flush when the signs appear. Keep the system clean afterwards with inhibitor and a magnetic filter, which BS 7593:2019 recommends servicing, ideally at the annual boiler service.
Call Olympus Plant & Tool Hire on 01752 922535 to book delivery of a Central Heating Power Flush to your home or job anywhere in the South Hams.





